🎒 Streaming Setup Instructions

Everything should be stored in a single bag, which will be placed in the storage area.

📡 Wireless Transmitter Setup

1. Find the wireless transmitter.
2. Slot 6 works best for the transmitter.
3. Make sure it is switched on before it’s plugged in.
4. If both transmitters light up blue, they should be connected.

💻 Laptop Access

• Computer Password: (message me)
• Occasionally, the laptop will prompt you to change the password.
  → Just enter the same password for all the prompts.

🎥 Equipment Setup

📷 Tripod & Cable Setup

1. Set up the tripod.
2. Connect the HDMI to USB-C dock.
3. The cable dock connects to the computer.

🔊 Sound Block Setup

1. Connect the wireless transmitter to the audio interface (Zoom Recorder).
2. Connect a new USB-C cable to the audio interface from the dock.
3. Hold down the power button until the device turns on.
4. SD card is not necessary.
5. On the sound block:
   • Click Menu
   • Scroll down and select USB Audio I/F
   • Select PC/Mac
   • Select Linear

📺 Streaming Instructions

1. Open OBS Studio.
2. Open the Waterfox browser.
3. Connect to the PSC Guest network.
4. Go to YouTube.
5. In the top-right profile menu, select YouTube Studio → click Go Live.
6. Edit the stream title to reflect the current event (Make sure to change date).
7. In OBS 10 seconds before the service starts:
   • Click Start Streaming
   • Click Start Recording
     → This begins the actual live stream.

🎛️ Camera Control

• To focus, tap the screen on the desired subject. (It should track the subject you tapped)
• To zoom:
  • Use the wheel on the lens, or
  • Use the knob in the top-right of the camera.
• If the camera prompts for pixel mapping, select Cancel.
• Don’t forget to stop the stream when finished.